There’s a new development in decorative cutting technology. Dustless Technologies introduces a dust control system for hand grinders that is applicable to decorative cutting in concrete.

Decorative cutting in concrete can be very messy – kicking up a lot of dust. The dust can be harmful, and clean up time consuming and costly. The dust containment system makes decorative cutting with a hand grinder a quick "in-and-out" operation. This dustless decorative cutting system is ideal for indoor settings or in public locations where it’s important to keep the mess to a minimum.

The DustBuddie™ decorative cutting system includes a standard DustBuddie™ dust shroud equipped with a special cover plate. The brush skirt of the standard DustBuddie™ has to be removed, and the front edge of the DustBuddie™ has to be trimmed with a band saw or some type of blade capable of cutting polycarbonate plastic.

When you begin decorative cutting with the system, be sure to get the blade in and out of the cut quickly, as the DustBuddie™ does the most effective job of capturing the dust when the blade is fully in the cut.

One of the things that makes the DustBuddie™ so good for decorative cutting is the clear polycarbonate shroud. It provides greater visibility for the operator for more clean, accurate and productive decorative cutting. It is an ideal tool for renovation contractors who have to use point-of-origin dust collection tools to comply with EPA regulations covering lead paint removal.

Check out the demo video of the DustBuddie™ performing decorative cutting. It’s amazing!