 |
|
 |
|||||||||||||||||||
|
|
|
|||||||||||||||||||
 |
||
|
||
|
||
|
||
|
||
|
||
|
||
 |
||
|
||
|
||
 |
||
Click here to view DustPro™ HEPA Vacuum Videos
The DustPro™ 300 is designed for capturing saw dust from wood flooring applications. It produces 300 CFM and features a 30 gallon canister that is easily removed for emptying. Contractors like how the unit is price considerably lower than competitive HEPA vacuums and the AirBender™ technology enables them to go up to 10 times longer between filter cleanings. This workhorse vacuum has fewer moving parts, and no solenoids, to require less maintenance and provide more reliable performance.
The DustPro 300 comes
standard with 125 ft of hose: 25' to a 2-way adapter, a 50' length of 2" hose to your belt sander and a 50' length of 1.5" hose to edger or buffer. It has enough power to run efficiently up to 125’ from the vacuum. It has capacity to sand 500-600 sq ft before removing the plastic collection bag. Also the DustPro 300 is very lightweight and easy to load and unload for one person since the dust collection/cyclone reservoir has its own wheels and is disconnected by simply removing a bungee cord.
DustPro™ 300 delivers far greater productivity
The best way to get high productivity out of any HEPA vacuum is to keep the filter clean. That doesn’t mean pulsing every 15 seconds to blow dust off the pleats. It means keeping dust away from the HEPA filter to begin with. That is the way the DustPro™300 HEPA Vacuum, with Air-Bender™ technology, increases productivity.
The truth about pulse cleaning
Pulse cleaning every 15 seconds is hard on HEPA filters. Violent bursts of air explode - thrusting abrasive granules against the delicate filter material, damaging the microscopic fibers and shortening the HEPA filter’s life. DustPro™ vacuums are much kinder to your HEPA filters, requiring pulsing 1, instead of, 240 times each hour.
Why the DustPro™ requires less maintenance
The moving parts associated with automated pulse-cleaning systems (solenoids) are subject to frequent breakdowns. DustPro™ vacuums have no solenoids - only mechanical switches - proven to be reliable when exposed to constant vibration, dust and other harsh conditions.
How the DustPro™ extends cleaning intervals 10 times longer
Air-Bender™ technology greatly increases cleaning intervals by doing a superior job of capturing dust BEFORE it reaches the HEPA filter. The Air-Bender™ cyclone captures 98% of airborne dust compared to typical cyclones, which capture only 80%.
How Air-Bender™ technology works
The Air-Bender™ cyclonic system “bends” the air stream at the bottom of the canister, and allows 98% of the dust to settle in a large Passive Air Zone before the air moves on to the HEPA filter canister. By allowing only 2%, instead of 20%, of the dust to reach the HEPA filter, Air-Bender™ technology enables contractors to go 10 times longer between cleaning intervals.
Features:
Motor: 2.1 HP Tangential bypass w/ 25’ cord
Power: 1560 watts
Voltage: 120v 50/60hz
Amperage: 13 amps
Water lift: 70 in
CFM: 312 CFM w 3" orifice
Peak / amps: 13 amps. 15.5 peak
Watts: 1753
Noise level: 79 DB
Stage Motor: 1 stage motor 120V
Filter: 31.19 SQFT
Efficiency Rating: 99.97% Efficient @ 0.3 Micron
Filtration: Certified HEPA rated 99.97% @ .3 micron with AirBender™ Cyclone
Hoses: One 2.5" x 25', one 2" x 50', one 1.5" x 50', plus a 2-way adapter
Products
